PartSnap Proof Library

Example cases for the parts that burn time on a route.

These are conservative field examples for SplashLens and PartSnap. They show what the app should ask for before a tech orders, escalates, or saves proof. No example is a manufacturer-confirmed fitment claim.

Try PartSnap Free
Pump

Impeller with worn molded number

PartSnap should look for vane shape, shaft seal context, pump family, and a second proof photo of the pump label.

  • Needed proof: model plate
  • Needed proof: diameter or stamped number
  • Escalate when number is unreadable
Callback risk: medium until the model and impeller dimensions are confirmed.
Sanitizer

Salt cell with faded label

Use unions, cable connector, controller model, cell length, and flow switch context to narrow the family without pretending certainty.

  • Needed proof: controller label
  • Needed proof: cell body markings
  • Verify before selling replacement
Callback risk: high when only the cell body photo is available.
Robot

Cleaner track or brush

Robot parts often look similar across families. PartSnap should ask for cleaner model, power supply label, track profile, and basket style.

  • Needed proof: robot serial/model
  • Needed proof: track width/profile
  • Escalate to vendor packet
Callback risk: medium because cleaner families share visual parts.
Automation

Board, relay, or actuator

Automation work needs safety language and board/box model proof. The app should help package a cleaner senior-tech ask.

  • Needed proof: enclosure label
  • Needed proof: board revision
  • No electrical repair claim
Callback risk: high without qualified verification.
Lighting

Nicheless light or transformer

Lighting examples should ask for voltage, niche/fixture style, transformer label, and GFCI behavior before any recommendation.

  • Needed proof: voltage
  • Needed proof: fixture family
  • Qualified electrical work only
Callback risk: high until voltage and fixture family are confirmed.
Filter

DE grid or manifold

PartSnap should prompt for tank model, grid count/height, manifold shape, and air-relief assembly proof.

  • Needed proof: filter model
  • Needed proof: grid size/count
  • Save to proof passport
Callback risk: medium when grids are measured but tank model is missing.
Valve

Actuator, diverter, lid, union

Prompt for pipe size, valve body markings, actuator model, lid screw pattern, and O-ring dimensions.

Heater

Old label and control display

Capture the display code, heater model, gas/electric context, serial plate, and manual reference before field action.

Cover

Cover motor, key switch, sensor

Ask for control box label, motor plate, switch style, cover brand, and qualified-safety verification.

Have a real training case?

Pool schools, service companies, vendors, creators, and manufacturers can send a private example for feedback or partnership discussion. SplashLens can build safe training scenarios without implying endorsement.

Send a case