What It Means
High Amperage / Breaker Trip
Likely Causes
- Impeller mechanically binding
- Worn motor bearings increasing drag
- Voltage drop causing motor to draw excess current
- Start/run capacitor failed on single-phase motors
Next Checks
- Check supply line voltage at motor terminals — should match nameplate
- Inspect and clean impeller for any debris binding
- Check and replace run/start capacitor if reading out of spec
- If bearings worn: motor replacement needed
Verify Before Repair
SplashLens is a field reference, not a repair guarantee. Confirm the visible code, exact model, and current manufacturer procedure before replacing parts, bypassing safeties, or quoting a customer.
SplashLens is independent and is not affiliated with Sta-Rite or other equipment manufacturers.
Use SplashLens At The Pad
Manual error-code lookup works after the app has loaded once. AI scan features require internet and should be treated as a second set of eyes.