What It Means
Water In Electronics / Battery Area
Likely Causes
- Seal or housing crack
- Charging-port gasket failure
- Robot stored wet or dropped
- Improper service opening
Next Checks
- Stop using and do not charge until fully inspected
- Dry exterior and check warranty/service route
- Inspect gaskets, covers, and housing for cracks
- Water intrusion in battery/electronics is a service or replacement issue
Verify Before Repair
SplashLens is a field reference, not a repair guarantee. Confirm the visible code, exact model, and current manufacturer procedure before replacing parts, bypassing safeties, or quoting a customer.
SplashLens is independent and is not affiliated with Robots - Expanded Field Guide or other equipment manufacturers.
Use SplashLens At The Pad
Manual error-code lookup works after the app has loaded once. AI scan features require internet and should be treated as a second set of eyes.