Pentair LIGHT-NOT-SYNCED: Color Lights Out Of Sync

What It Means

Color Lights Out Of Sync

Likely Causes

• Power-cycle color commands not synchronized
• Mixed IntelliBrite/GloBrite/MicroBrite behavior
• Controller mode mismatch
• One fixture power-cycled separately

Next Checks

1. Turn all light circuits off for 30 seconds, then choose the same saved color/show
2. If using Color Sync or IntelliCenter, confirm each light is assigned to the correct circuit/group
3. Avoid mixing unsupported generations in the same synchronized group
4. If one light never follows, isolate that fixture and test voltage/control

Verify Before Repair

SplashLens is a field reference, not a repair guarantee. Confirm the visible code, exact model, and current manufacturer procedure before replacing parts, bypassing safeties, or quoting a customer.

SplashLens is independent and is not affiliated with Pentair or other equipment manufacturers.

Use SplashLens At The Pad

Manual error-code lookup works after the app has loaded once. AI scan features require internet and should be treated as a second set of eyes.