Pentair BUBBLER-DIM: ColorVision Bubbler Light Dim / Weak Water

What It Means

ColorVision Bubbler Light Dim / Weak Water

Likely Causes

• Low flow through bubbler line
• Debris in nozzle or flow control
• Light lens dirty or scaled
• Pump speed too low during feature mode

Next Checks

1. Increase feature pump speed and check valve position
2. Remove and clean bubbler nozzle/lens per manual
3. Balance flow if multiple bubblers are uneven
4. Inspect for air leaks or obstruction in feature plumbing

Verify Before Repair

SplashLens is a field reference, not a repair guarantee. Confirm the visible code, exact model, and current manufacturer procedure before replacing parts, bypassing safeties, or quoting a customer.

SplashLens is independent and is not affiliated with Pentair or other equipment manufacturers.

Use SplashLens At The Pad

Manual error-code lookup works after the app has loaded once. AI scan features require internet and should be treated as a second set of eyes.