What It Means
Motor/Drive Fault
Likely Causes
- Motor shaft jammed (tangled cable or debris)
- Drive board failure
- Impeller blocked
Next Checks
- Remove robot from pool
- Check for tangled cable around roller brushes
- Clear any debris from impeller
- Reset by unplugging 30 seconds
- If persists: drive board replacement
Verify Before Repair
SplashLens is a field reference, not a repair guarantee. Confirm the visible code, exact model, and current manufacturer procedure before replacing parts, bypassing safeties, or quoting a customer.
SplashLens is independent and is not affiliated with Maytronics (Dolphin) or other equipment manufacturers.
Use SplashLens At The Pad
Manual error-code lookup works after the app has loaded once. AI scan features require internet and should be treated as a second set of eyes.