What It Means
Pressure / Flow Switch Fault
Likely Causes
- Pump not running or losing prime
- Low water level
- Closed suction valve
- Clogged pump basket or impeller
- Pressure switch failure
Next Checks
- Confirm pump is running and primed
- Check skimmer water level
- Open all suction valves
- Clean pump basket and inspect impeller
- Test pressure switch — should close with adequate flow; replace if stuck open
Verify Before Repair
SplashLens is a field reference, not a repair guarantee. Confirm the visible code, exact model, and current manufacturer procedure before replacing parts, bypassing safeties, or quoting a customer.
SplashLens is independent and is not affiliated with Jandy / Zodiac or other equipment manufacturers.
Use SplashLens At The Pad
Manual error-code lookup works after the app has loaded once. AI scan features require internet and should be treated as a second set of eyes.