What It Means
AquaLink EDGE Local vs Cloud Control Check
Likely Causes
- App/cloud status differs from local panel
- Wi-Fi, backup network, or hotspot path changed
- Home Hub or in-can display works while app status is stale
- Schedule, scene, profile, or access-level confusion
- Relay, RS-485, or connected-device assignment not documented
Next Checks
- Confirm local control at the in-can display or Home Hub before treating the controller or equipment as failed
- Capture app/cloud status with timestamp plus local screen proof
- Document primary Wi-Fi, backup network, or tech hotspot state if visible
- Photograph connected-device assignments, relay labels, RS-485 wiring, and the affected equipment plate before changes
- Escalate with a proof packet before replacing a controller, radio, board, router, pump, heater, light, or actuator
Verify Before Repair
SplashLens is a field reference, not a repair guarantee. Confirm the visible code, exact model, and current manufacturer procedure before replacing parts, bypassing safeties, or quoting a customer.
SplashLens is independent and is not affiliated with Jandy / Zodiac or other equipment manufacturers.
Use SplashLens At The Pad
Manual error-code lookup works after the app has loaded once. AI scan features require internet and should be treated as a second set of eyes.