What It Means
Motor Not Starting
Likely Causes
- Capacitor failed (single-phase models)
- Drive board fault
- Motor shaft seized
Next Checks
- Check and replace run/start capacitor on single-phase motors
- Try spinning motor shaft by hand — if locked, motor may need replacement
- Test drive board output; if no signal, drive board replacement needed
Verify Before Repair
SplashLens is a field reference, not a repair guarantee. Confirm the visible code, exact model, and current manufacturer procedure before replacing parts, bypassing safeties, or quoting a customer.
SplashLens is independent and is not affiliated with IntelliFlo (Pentair) or other equipment manufacturers.
Use SplashLens At The Pad
Manual error-code lookup works after the app has loaded once. AI scan features require internet and should be treated as a second set of eyes.