What It Means
Spa Breaker / GFCI Trips
Likely Causes
- Heater element ground fault
- Pump or blower fault
- Water intrusion in pack or topside
- Ozone/UV accessory fault
- Incorrect wiring or wet connection
Next Checks
- Do not bypass a GFCI
- Document when it trips: immediately, heat call, pump start, blower, or light
- Disconnect accessory loads only if qualified and following the manual
- Keep water-intrusion photos for the proof packet
- Electrical fault isolation requires qualified service
Verify Before Repair
SplashLens is a field reference, not a repair guarantee. Confirm the visible code, exact model, and current manufacturer procedure before replacing parts, bypassing safeties, or quoting a customer.
SplashLens is independent and is not affiliated with Hot Tubs / Spas or other equipment manufacturers.
Use SplashLens At The Pad
Manual error-code lookup works after the app has loaded once. AI scan features require internet and should be treated as a second set of eyes.