What It Means
Light Missing From OmniLogic / OmniPL
Likely Causes
- Light not assigned in configuration
- MSP/MPP communication issue
- Incorrect relay or low-voltage output mapping
- Firmware/configuration mismatch after equipment replacement
Next Checks
- Enter service/configuration and verify light relay, transformer, and group assignment
- Power cycle Omni controller from shutdown, breaker off 60 seconds, then allow several minutes to reconnect
- Check for communication-loss alarms before replacing parts
- Export/save configuration before major changes
Verify Before Repair
SplashLens is a field reference, not a repair guarantee. Confirm the visible code, exact model, and current manufacturer procedure before replacing parts, bypassing safeties, or quoting a customer.
SplashLens is independent and is not affiliated with Hayward or other equipment manufacturers.
Use SplashLens At The Pad
Manual error-code lookup works after the app has loaded once. AI scan features require internet and should be treated as a second set of eyes.