What It Means
Vigipool Remote Alert Or Chemistry Mismatch
Likely Causes
- Remote data is stale or the equipment room is offline
- Manual water test does not match the app value
- Temperature, filtration, pump, light, pH, or ORP alert is tied to one disconnected device
- Controller clock or schedule differs from the app
- Sensor needs cleaning, calibration, or qualified review
Next Checks
- Confirm the alert timestamp and whether the local panel still controls the equipment
- Capture the Vigipool alert screen, controller label, device status, and network state
- Verify chemistry with a fresh manual test before changing feed settings
- Compare app schedules with the local controller clock and active mode
- Escalate repeated sensor, pH/ORP feed, or electrical faults with the proof packet
Verify Before Repair
SplashLens is a field reference, not a repair guarantee. Confirm the visible code, exact model, and current manufacturer procedure before replacing parts, bypassing safeties, or quoting a customer.
SplashLens is independent and is not affiliated with Connected Pool Network or other equipment manufacturers.
Use SplashLens At The Pad
Manual error-code lookup works after the app has loaded once. AI scan features require internet and should be treated as a second set of eyes.