What It Means
Water Entry Alarm
Likely Causes
- Water has entered the electronics compartment
- Seal or gasket damaged or displaced
- Robot dropped or impacted before water entry
Next Checks
- Remove robot from pool immediately
- Do NOT plug in or charge until fully dry
- Allow robot to air-dry completely (24-48 hours minimum)
- Inspect all seals, gaskets, and housing for cracks or damage
- Contact Betta/BWT support — electronics water exposure may require professional service
Verify Before Repair
SplashLens is a field reference, not a repair guarantee. Confirm the visible code, exact model, and current manufacturer procedure before replacing parts, bypassing safeties, or quoting a customer.
SplashLens is independent and is not affiliated with Betta (BWT) or other equipment manufacturers.
Use SplashLens At The Pad
Manual error-code lookup works after the app has loaded once. AI scan features require internet and should be treated as a second set of eyes.