What It Means
Motor Blocked / Impeller Jam
Likely Causes
- Debris wrapped around impeller or brushes
- Drive wheel obstructed
- Robot caught on drain cover or obstacle
Next Checks
- Remove robot from pool immediately
- Clear all debris from impeller, brushes, and drive wheels
- Check suction inlet for blockage
- Reset by unplugging for 30 seconds and restarting
- If impeller is visibly jammed, gently rotate by hand to free
Verify Before Repair
SplashLens is a field reference, not a repair guarantee. Confirm the visible code, exact model, and current manufacturer procedure before replacing parts, bypassing safeties, or quoting a customer.
SplashLens is independent and is not affiliated with Beatbot or other equipment manufacturers.
Use SplashLens At The Pad
Manual error-code lookup works after the app has loaded once. AI scan features require internet and should be treated as a second set of eyes.