What It Means
Cliff Detection or Water Entry Error
Likely Causes
- Robot detected pool edge, stairs, or abrupt ledge
- Water ingress into electronics compartment (waterproofing breach)
- Cliff sensor dirty or obscured
Next Checks
- Place robot on flat pool floor away from steps or ledges
- Clean cliff detection sensors on underside with soft cloth
- Inspect seals and gaskets for damage if water ingress is suspected
- Do not run robot on pools with steep or non-standard geometry without checking compatibility
Verify Before Repair
SplashLens is a field reference, not a repair guarantee. Confirm the visible code, exact model, and current manufacturer procedure before replacing parts, bypassing safeties, or quoting a customer.
SplashLens is independent and is not affiliated with Beatbot or other equipment manufacturers.
Use SplashLens At The Pad
Manual error-code lookup works after the app has loaded once. AI scan features require internet and should be treated as a second set of eyes.